Membership Services

General home handyman maintenance tasks and preventative measures cover a wide range of activities that homeowners can perform to keep their homes in good condition and prevent issues from arising. Here's a detailed list:

• Inspect and Test Smoke Detectors and Carbon Monoxide Alarms:
• Test alarms monthly and replace batteries annually.
• Replace units every 10 years as recommended by manufacturers.
• Check and Replace HVAC Filters:
• Replace filters regularly (typically every 1-3 months) to maintain efficiency and indoor air quality.
• Inspect and Clean Dryer Vents
• Remove lint buildup from dryer vents annually to prevent fire hazards and ensure efficient operation.
• Inspect and Repair Caulking and Grout:
• Check caulking around sinks, tubs, and showers; repair or replace as needed to prevent water damage.
• Inspect Plumbing for Leaks:
• Check under sinks, around toilets, and in basements for signs of leaks; repair promptly to prevent water damage and mold growth.
• Inspect and Repair Window Screens:
• Check screens for holes or tears; repair or replace damaged screens to keep insects out and improve ventilation.
• Test and Inspect Electrical Outlets and Switches:
• Test outlets with a tester or plug-in device; inspect for loose connections or signs of wear.
• Check and Replace Weatherstripping:
• Inspect and replace worn weatherstripping around doors and windows to improve energy efficiency and comfort.
• Inspect and Maintain Appliances:
• Clean refrigerator coils, check dishwasher seals, and inspect stove exhaust fans regularly for optimal performance.

• Inspect Roof and Gutters:
• Check for damaged or missing shingles, and inspect gutters for debris and proper drainage.
• Inspect and Clean Exterior Siding:
• Clean siding annually to remove dirt, mold, and mildew; repair or replace damaged sections as needed.
• Trim Trees and Shrubs:
• Trim branches away from the house to prevent damage to the roof and siding during storms.
• Inspect and Maintain Deck or Patio:
• Clean and seal decks or patios annually to protect against weather damage and extend their lifespan.
• Inspect and Maintain Exterior Paint and Trim:
• Touch up paint and stain on exterior surfaces to protect against weathering and maintain curb appeal.
• Inspect and Maintain Outdoor Plumbing:
• Insulate outdoor faucets and pipes in colder climates to prevent freezing and bursting.
• Inspect and Maintain Outdoor Lighting:
• Replace bulbs as needed and ensure fixtures are secure and functioning properly for safety and security.

• Schedule Seasonal Inspections:
• Conduct seasonal inspections of heating and cooling systems, plumbing, and other critical systems to identify and address issues early.
• Monitor Humidity Levels:
• Use a hygrometer to monitor indoor humidity levels and use dehumidifiers or ventilation to maintain optimal levels (around 30-50%).
• Inspect and Seal Cracks and Gaps:
• Seal gaps around doors, windows, and pipes to prevent drafts and improve energy efficiency.
• Maintain Landscaping and Drainage:
• Ensure proper grading and drainage around the foundation to prevent water infiltration and potential structural damage.
• Plan for Emergencies:
• Know the location of shut-off valves for water, gas, and electricity; keep emergency supplies on hand.

By staying proactive with these handyman maintenance tasks and preventative measures, you can save money on repairs, prolong the life of their home's systems and components, and ensure a safe and comfortable living environment.

We'll help coordinate bigger jobs such as: 

• Roof and Chimney Inspections and Repair/Cleaning
• New Addition Construction
• Large Concrete and Masonry Projects
• Foundation Inspection and Repairs
• Gutter Cleaning 
• Gutter Replacement and Repairs

 Drywall handyman repair and maintenance tasks involve various jobs aimed at repairing, maintaining, and improving drywall surfaces in homes or buildings. Here are some common drywall handyman services:

• Patching Holes: Repairing holes in drywall caused by accidents, nails, or screws.
• Fixing Cracks: Filling and repairing cracks that may develop due to settling or temperature changes.
• Repairing Water Damage: Addressing drywall damage from water leaks or flooding, including replacing damaged sections if necessary.
• Fixing Popcorn Ceiling Damage: Repairing or removing damaged sections of popcorn ceilings and reapplying texture as needed.
• Repairing Corner Bead: Fixing or replacing metal or plastic corner bead that protects outside corners of drywall.

• Repainting or Touching Up: Repainting or touching up painted drywall surfaces to maintain their appearance and protect against wear and tear.
• Texture Matching: Blending new patches or repairs with existing textured drywall surfaces for a seamless appearance.
• Sealing and Priming: Applying sealants or primers to prepare drywall surfaces for painting or texture application.
• Preventive Maintenance: Inspecting drywall for signs of damage, such as cracks or bulging, and addressing issues before they worsen.

• Drywall Installation: Installing new drywall sheets or panels during renovations or construction projects.
• Soundproofing Installation: Installing soundproof drywall or insulation to reduce noise transmission between rooms or from external sources.
• Mold-Resistant Drywall Installation: Installing moisture and mold-resistant drywall in areas prone to high humidity, such as bathrooms or basements.

• Wall Partition Construction: Building temporary or permanent interior walls using drywall to create separate spaces.
• Trim and Molding Installation: Installing baseboards, crown molding, or other trim around drywall edges to enhance aesthetics.
• Drywall Reinforcement: Reinforcing drywall around areas prone to impact or wear, such as corners or high-traffic areas

Our team can help design and build the perfect outdoor living area for your home. Whether you want a space for entertaining or just relaxing, we can make it happen. Let us create your dream outdoor oasis. 

• Cleaning: Regular cleaning to remove dirt, debris, mold, mildew, and stains from the deck surface, including pressure washing if necessary.
• Sealing or Staining: Applying a protective sealant or stain to the deck surface to enhance its appearance and protect it from weathering, UV rays, moisture, and wear.
• Deck Inspection: Periodic inspections to check for any signs of damage, such as loose boards, nails, screws, or structural issues that may need repair.
• Repair: Repairing or replacing damaged or rotted deck boards, railings, stairs, or support structures to maintain safety and structural integrity.
• Refinishing: Sanding or resurfacing the deck to remove old finishes or imperfections and applying a fresh coat of stain or sealant for a renewed look.
• Waterproofing: Applying a waterproofing membrane or treatment to protect the underside of the deck and extend its lifespan by preventing water damage.
• Deck Board Replacement: Removing and replacing individual deck boards that are warped, cracked, or otherwise damaged beyond repair.
• Railing Maintenance: Inspecting and maintaining deck railings for stability, ensuring they meet safety codes, and repairing or replacing as needed.
• Hardware Inspection: Checking and tightening bolts, screws, and other fasteners to ensure they are secure and safe.
• Seasonal Maintenance: Providing seasonal maintenance tasks such as clearing leaves, snow, or debris to prevent moisture buildup and maintain cleanliness.

We'll help coordinate bigger jobs such as: 

Architectural Design and Build Plans

New Deck Construction

Lawn and garden maintenance services encompass a variety of tasks aimed at keeping your outdoor spaces healthy, tidy, and visually appealing. Here are some common services typically offered by our lawn and garden maintenance professionals:

• Hedge Trimming: Shaping and maintaining hedges to enhance the overall appearance of the landscape.
• Edging: Creating clean lines along driveways, sidewalks, and flower beds to define borders and enhance curb appeal.
• Landscape Maintenance: General upkeep of landscape features such as decorative rocks, pathways, garden sculptures, and outdoor furniture.
• Trimming and Pruning: Pruning shrubs, bushes, and small trees to promote healthy growth and maintain shape.
• Weeding: Removing weeds from flower beds, gardens, and other landscaped areas to prevent competition for nutrients and maintain aesthetics.
• Leaf Removal: Clearing fallen leaves and debris from lawns, gardens, and pathways
• Seasonal Cleanups: Providing thorough cleanups in spring and fall, including cutting back perennials, removing dead plants, and preparing the garden for the upcoming season.
• Scheduled Lawn Mowing: Regularly cutting the grass to maintain an even height and neat appearance.
• Mulching: Applying mulch around plants and in flower beds to retain moisture, suppress weeds, and improve soil health.
• Aeration: Loosening compacted soil to improve water and nutrient absorption for healthier grass roots.
• Overseeding: Planting grass seed over existing turf to fill in bare patches and improve lawn density.

We'll help coordinate bigger jobs such as: 

• Fertilizing: Applying fertilizers to promote healthy growth and maintain nutrient balance in the soil.
• Watering Systems: Ensuring proper watering schedules and techniques to maintain healthy plants and grass during dry periods.
• Pest Control: Monitoring for pests and diseases and applying appropriate treatments.
• Large Project Consultation and Design: Providing advice on plant selection, garden layout, and landscape design to optimize the beauty and functionality of outdoor spaces.

These services can be customized based on your specific needs and the seasonal requirements of your lawn and garden. 

Broken or damaged doors and windows can compromise the safety and security of your home. Our team can quickly repair or replace damaged doors and windows, restoring your home's security and energy efficiency. Here are some common tasks related to door and window repair and maintenance:

1. Adjusting and Lubricating Hinges: Ensuring doors open and close smoothly by lubricating hinges and adjusting them if they are misaligned.
2. Replacing Door Hardware: Installing or replacing doorknobs, locks, deadbolts, and handles for improved security and functionality.
3. Weather Stripping Installation: Installing or replacing weather stripping around doors to improve insulation and energy efficiency.
4. Fixing Door Frames: Repairing damaged door frames, including filling cracks, re-aligning, or replacing sections if necessary.
5. Fixing Sticking Doors: Adjusting doors that stick or are difficult to open or close due to changes in humidity or structural issues.
6. Repairing or Replacing Screens: Fixing torn or damaged screens on screen doors for better ventilation and insect protection.
7. Replacing Door Thresholds: Installing or replacing door thresholds to improve weather resistance and prevent drafts.
8. Painting or Refinishing: Repainting or refinishing doors to enhance their appearance and protect them from weathering.
9. Door Replacement and Removal

1. Installing Window Screens: Adding or replacing window screens to allow for ventilation while keeping insects out.
2. Sealing and Caulking: Applying caulk or sealant around window frames to prevent air leaks and improve energy efficiency.
3. Repairing or Replacing Hardware: Fixing or replacing window hardware such as locks, handles, cranks, or hinges.
4. Weather Stripping Replacement: Installing new weather stripping around windows to improve insulation and reduce drafts.
5. Adding Window Insulation: Applying window film or installing insulating window treatments to improve energy efficiency.
6. Reglazing Windows: Repairing or replacing the putty or sealant (glazing) around windowpanes to secure them and prevent air or water leaks.
7. Cleaning and Maintenance: Regular cleaning of window glass, frames, and tracks to remove dirt, debris, and mold buildup.
8. Upgrading Windows: Installing energy-efficient windows or upgrading to double-glazed or insulated glass units for better thermal performance.
9. Repairing Window Frames: Fixing damaged or rotted window frames by patching, filling, or replacing sections as needed.
10. Replacing Broken Glass: Removing and replacing broken windowpanes of glass units.

These tasks ensure that doors and windows function properly, enhance the aesthetics of your home, and contribute to energy savings by improving insulation and reducing drafts. 

1. Replacing Electrical Outlets and Switches: Installing new outlets, switches, or dimmers, and replacing old or faulty ones to ensure proper function and safety.
2. Repairing Electrical Fixtures: Fixing or replacing light fixtures, ceiling fans, or other electrical fixtures that are not working correctly.
3. Fixing Electrical Shorts: Identifying and repairing electrical shorts or faults that cause circuit breakers to trip.
4. Repairing or Installing Light Fixtures: Installing new light fixtures or repairing existing ones to improve lighting quality or aesthetics.
5. Troubleshooting Electrical Problems: Diagnosing and fixing electrical issues such as flickering lights, intermittent power loss, or electrical buzzing sounds.

1. Inspecting Electrical Panels: Checking the electrical panel for proper labeling, ensuring circuit breakers are in good condition, and tightening connections.
2. Testing GFCI Outlets: Testing and resetting Ground Fault Circuit Interrupter (GFCI) outlets to ensure they provide shock protection.
3. Replacing Smoke Detectors: Installing new smoke detectors or replacing old ones to ensure they are functioning properly and comply with safety standards.
4. Checking Electrical Wiring: Inspecting electrical wiring for signs of wear, damage, or overheating, and addressing any issues to prevent safety hazards.
5. Upgrading Electrical Systems: Upgrading electrical systems to meet current building codes, improve energy efficiency, or accommodate additional electrical loads.
6. Installing Surge Protectors: Installing surge protection devices to protect sensitive electronic equipment from power surges.

1. Adding Electrical Outlets: Installing additional outlets to improve convenience and safety, especially in older homes with fewer outlets.
2. Outdoor Electrical Maintenance: Inspecting and maintaining outdoor electrical outlets, lighting, and fixtures to withstand weather conditions.
3. Childproofing Outlets: Installing childproof outlets or covers to prevent accidental electrical shocks or tampering.
4. Electrical Code Compliance: Ensuring all electrical work meets local building codes and safety regulations.
5. Emergency Electrical Repairs: Responding to urgent electrical issues such as power outages, electrical shocks, or other emergencies.

We'll help coordinate bigger jobs such as: 

1. Upgrading Electrical Systems: Upgrading electrical systems to meet current building codes, improve energy efficiency, or accommodate additional electrical loads.
2. Panel Installation
3. New Circuit Installation
4. Design and Remodel: Upgrade your home's lighting with our professional installation services. We can help with everything from new fixtures to smart lighting systems. Let us help you create the perfect ambiance in your home.

* For any electrical work beyond basic repairs and maintenance, or for tasks involving significant wiring or circuit modifications, it's crucial to hire a licensed electrician. They have the expertise and training required to handle electrical installations and repairs safely and effectively, ensuring compliance with local codes and regulations.

Plumbing handyman services encompass a variety of tasks aimed at maintaining and repairing plumbing fixtures and systems within homes or buildings. While basic plumbing maintenance can often be handled by a handyman, more complex plumbing issues may require the expertise of a licensed plumber. Here are some common plumbing handyman services and routine maintenance tasks your handyperson will perform. 

1. Fixing Leaky Faucets: Repairing or replacing washers, seals, or cartridges in faucets to stop leaks and conserve water.
2. Repairing or Replacing Toilets: Fixing running toilets, replacing toilet flappers, or repairing leaks around the base.
3. Clearing Clogged Drains: Using plungers, drain snakes, or augers to clear minor clogs in sinks, showers, or tubs.
4. Repairing Leaking Pipes: Patching or replacing sections of leaking pipes, including fittings and joints.
5. Fixing Water Heater Issues: Addressing problems with water heaters, such as 
6. Inspecting for Leaks: Checking faucets, toilets, and visible pipes for leaks and addressing them promptly.
7. Checking Water Pressure: Testing water pressure and adjusting or replacing pressure regulators if necessary.
8. Inspecting and Flushing Water Heaters: Draining and flushing water heaters to remove sediment buildup and ensure efficient operation.
9. Insulating Pipes: Installing pipe insulation to prevent freezing during colder months and reduce energy loss from hot water pipes.
10. Testing Sump Pump: Testing and maintaining sump pumps to ensure they are operational in case of flooding or heavy rainfall.
11. Checking and Replacing Washers and Seals: Inspecting and replacing worn-out washers, seals, and gaskets in faucets and toilets to prevent leaks.

We'll help coordinate bigger jobs such as: 

1. Burst Pipe Repair: Responding to emergencies such as burst pipes and quickly repairing or replacing damaged sections.
2. Water Heater Failure: Addressing sudden water heater malfunctions or leaks to restore hot water supply.
3. Frozen Pipe Thawing: Thawing frozen pipes safely to prevent bursting and restoring water flow.
4. Clogged Sewer Lines: Clearing sewer line blockages to restore proper drainage and prevent backups.

1. Installing Plumbing Fixtures: Installing new sinks, faucets, toilets, showers, or bathtubs as part of renovations or upgrades.
2. Upgrading Plumbing Systems: Upgrading older plumbing systems to improve efficiency, water conservation, and performance.
3. Pipe Inspections: Conducting video inspections of pipes to identify blockages, leaks, or structural issues.
4. Water Treatment System Maintenance: Servicing water softeners, filters, or other water treatment systems to ensure they function properly.

Handling furniture assembly and maintenance tasks is a common need for many homeowners. Here's a breakdown of typical tasks related to furniture assembly, maintenance, and upkeep:

• Flat-Pack Furniture Assembly:
• Assembling furniture from retailers that sell items in boxes with parts and instructions.
• Furniture Placement and Arrangement:
• Positioning and arranging furniture to optimize space and functionality in rooms.
• Wall Mounting:
• Mounting shelves, mirrors, or other furniture securely to walls.
• Bed and Bed Frame Assembly:
• Assembling beds, headboards, and bed frames, including adjusting for optimal comfort.
• Desk and Chair Assembly:
• Putting together desks, chairs, and office furniture for home offices or workspaces.
• Cabinet and Storage Assembly:
• Building cabinets, storage units, and shelving systems for organization.
• Outdoor Furniture Assembly:
• Assembling patio furniture, including tables, chairs, and umbrellas.

• Wood Furniture Maintenance:
• Polishing and treating wood surfaces to protect against scratches and moisture damage.
• Hardware Inspection and Tightening:
• Checking and tightening screws, bolts, and hinges on furniture to ensure stability.
• Fabric and Leather Care:
• Using appropriate cleaners and conditioners to care for fabric and leather furniture.
• Repairing Minor Damage:
• Patching small tears in upholstery or repairing scratches and dents in wood furniture.

• Seasonal Adjustments:
• Adjusting furniture placement and accessories seasonally for comfort and functionality.
• Inspection for Safety:
• Checking furniture for stability and safety, especially with children or pets in the home.
• Furniture Disassembly and Moving:
• Disassembling furniture for moving or storage, ensuring proper reassembly afterward.
• 
  

We'll help coordinate bigger jobs such as: 

• Updating and Refinishing:
• Updating furniture with new hardware, refinishing wood surfaces, or reupholstering cushions for a fresh look.
• Storage Solutions:
• Implementing storage solutions to keep furniture in good condition when not in use.

We provide a range of smart home, wifi, and EV charging services. Below is a comprehensive list of what you handyperson will tackle: 

• Smart Thermostat Installation and Setup:
• Installing and configuring smart thermostats for energy efficiency and remote temperature control.
• Smart Lighting Installation:
• Installing smart light bulbs, switches, or fixtures for automated lighting control and energy savings.
• Smart Lock Installation:
• Installing and setting up smart locks for enhanced home security and remote access control.
• Smart Home Hub Setup:
• Configuring and integrating smart home hubs (e.g., Google Nest, Amazon Alexa) to control multiple smart devices.
• Security Camera Installation:
• Installing and configuring smart security cameras for surveillance and remote monitoring.

• WiFi Network Setup and Optimization:
• Setting up WiFi routers, extenders, or mesh networks to improve coverage and signal strength throughout the home.
• Smart Home Device Connectivity:
• Connecting smart devices to WiFi networks and troubleshooting connectivity issues.

• EV Charger Maintenance:
• Performing routine maintenance checks on EV chargers to ensure they are functioning properly.
• Energy Management for EVs:
• Integrating EV charging schedules with home energy management systems for optimal efficiency.
• EV Battery Health Monitoring:
• Monitoring and optimizing EV battery health through charging habits and maintenance routines.

• Battery Replacement:
• Replacing batteries in smart home devices, such as sensors and controllers, to maintain functionality.
• Equipment Cleaning and Inspection:
• Cleaning dust and debris from smart home devices, WiFi routers, and EV chargers to prevent overheating and performance issues.

We'll help coordinate bigger jobs such as: 

• EV Charger Installation:
• Installing home EV chargers (Level 1 or Level 2) for convenient charging of electric vehicles.
• Charging Station Setup:
• Setting up dedicated charging stations and ensuring proper electrical wiring and safety compliance.
• Energy Management for EVs:
• Integrating EV charging schedules with home energy management systems for optimal efficiency.
• Network Troubleshooting:
• Diagnosing and resolving WiFi connectivity issues, including interference and weak signal areas.
• Network Security Enhancement:
• Implementing security measures such as password updates, network encryption, and firewall configuration.
• Guest Network Setup: Creating separate guest WiFi networks for visitors to maintain security and privacy.
• Data Backup and Security Checks:
• Backing up smart home device configurations and conducting security audits to protect against vulnerabilities.
• System Performance Optimization:
• Monitoring and optimizing smart home automation routines, WiFi network performance, and EV charging schedules for efficiency and reliability.

From minor upgrades to full-scale remodels, we can help transform your home into your dream space. 

Our team of experts can help with everything from custom cabinetry to new flooring and lighting. Let us help you create a home that works for you and your family.

Subscribe to enjoy the seasonal benefits program exclusive to our customers!